Fuji Electric Monitouch S8 series, Руководство по подключению

Страница: 90 / 406

7.1 PLC Connection 7-5
Available Memory
The available memory setting range varies depending on the PLC model. Be sure to set within the range available with the
PLC to be used. Use [TYPE] when assigning the indirect memory for macro programs.
*1 For items where double-words can be used (Num. Display, Graph, Sampling), data is processed as double-words.
For those where bits or words can be used, data is processed as words consisting of lower 16 bits.
For input:
Upper 16 bits are ignored.
For output: “0” is written for upper 16 bits.
*2 Byte device such as step relay is processed as described below.
For input:
Upper 8 bits are “0”.
For output: Lower 8 bits are written.
*3 To set up the file memory on the editor, enter “file number” + “: (colon)” + “address” in order.
*4 Define the file area as “ SI”.
Memory TYPE Remarks
M (auxiliary relay) 00H WM as word device
K (keep relay) 01H WK as word device
B (input/output relay) 02H WB as word device
L (link relay) 09H WL as word device
F (special relay) 0AH WF as word device
TS (timer/set value) 0BH *1
TR (timer/current value) 0CH *1
W9 (0.1-sec timer/current value) 0DH *1
CS (counter/set value) 0EH *1
CR (counter/current value) 0FH *1
BD (data memory) 10H *1
WS (step relay) 11H *2
Wn (file memory) 12H *3, *4
Example: W30 : 00002
Address
Colon
File number