Fuji Electric Frenic Mini FRN001C1E-2U, Инструкция по эксплуатации

Страница: 95 / 196

5-14
F02
Operation Method
Selects a source issuing a run command--keypad or external control signal input.
- If F02 = 0, 2, or 3, the inverter can run the motor by the and keys on the
built-in keypad. The motor rotational direction can be specified in two ways, ei-
ther by control signal input (F02 = 0) or by use of prefixed forward or reverse
rotation (F02 = 2 or 3).
When F02 = 0, to specify the motor rotational direction by control signal input,
assign the commands
FWD
and
REV
to terminals [FWD] and [REV], respectively.
Turn on the
FWD
or
REV
for the forward or reverse direction, respectively, and
then press the key to run the motor.
- If F02 = 1, the inverter can run the motor by control signal inputs. To specify the
motor rotational direction, assign the commands
FWD
and
REV
to terminals
[FWD] and [REV], respectively. Turn on the
FWD
or
REV
for the forward or re-
verse direction, respectively. If both of
FWD
and
REV
are turned on simultane-
ously, the inverter immediately decelerates to stop the motor.
The table below lists the operational relationship between function code F02
(Running/Stopping and Rotational Direction), the and key operation, and
control signal inputs to terminals [FWD] and [REV], which determines the rotational
direction.
Control signal inputs to
terminals [FWD] and [REV]
Function
code F02:
Key on the
keypad
Function code E98
FWD
command
Function code E99
REV
command
Motor
rotational
direction
OFF OFF Stop
ON OFF Forward
OFF ON Reverse
key
ON ON Stop
OFF OFF
ON OFF
OFF ON
0
key
ON ON
Stop
OFF OFF Stop
ON OFF Forward
OFF ON Reverse
1 Ignored.
ON ON Stop
key Forward
2
(forward/
fixed)
key
Ignored.
Stop
key Reverse
3
(reverse/
fixed)
key
Ignored.
Stop