Fuji Electric FRENIC-ECO, Инструкция по эксплуатации

Страница: 77 / 246

3-19
Output frequency
Reserved
Output current
Output voltage
Calculated torque
Frequency command
Running direction, status
Motor shaft speed
Load shaft speed
Reserved
PID process command
PID feedback value
PID output value
Figure 3.14 Menu Transition for "OPR MNTR"
Basic key operation
(1) When the inverter is powered ON, it automatically enters Running Mode. In Running Mode, press the
key to enter Programming Mode. The menu for function selection will be displayed.
(2) Select "3. OPR MNTR" by using and keys (moving Æ ).
(3) Press the key to display the screen for Operation Monitor (1 page out of a total of 4 pages).
(4) Select the page for the desired item by using and
keys and confirm the running status information
for the desired item.
(5) Press the key to go back to the menu.
Select desired menu by moving the pointer Æ with /
key.
Press key to finalize desired menu.
/
/
/
/
Common operation:
To confirm data, call the
desired page using
/
key.
Press key to return
to Menu.