Fuji Electric FRENIC-ECO Скачать руководство пользователя страница 4

Страница: 4 / 246

Application

• FRENIC-Eco is designed to drive a three-phase induction motor. Do not use it for single-phase motors

or for other purposes.

Fire or an accident could occur.

• FRENIC-Eco may not be used for a life-support system or other purposes directly related to the human

safety.

• Though FRENIC-Eco is manufactured under strict quality control, install safety devices for applications

where serious accidents or material losses are foreseen in relation to the failure of it.

An accident could occur.

Installation

• Install the inverter on a nonflammable material such as metal.

Otherwise fire could occur.

• Do not place flammable matter nearby.

Doing so could cause fire.

• Do not support the inverter by its terminal block cover during transportation.

Doing so could cause a drop of the inverter and injuries.

• Prevent lint, paper fibers, sawdust, dust, metallic chips, or other foreign materials from getting into the

inverter or from accumulating on the heat sink.

Otherwise, a fire or an accident might result.

• Do not install or operate an inverter that is damaged or lacking parts.

Doing so could cause fire, an accident or injuries.

• Do not get on a shipping box.
• Do not stack shipping boxes higher than the indicated information printed on those boxes.

Doing so could cause injuries.

Содержание FRENIC-ECO























































































































































































































































Результаты поиска

Содержание FRENIC-ECO

Отзывы:

Похожие инструкции для FRENIC-ECO

Бренды по названию

Популярные бренды

Fuji Electric FRENIC-ECO, Инструкция по эксплуатации

Результаты поиска

Содержание FRENIC-ECO

Отзывы:

Похожие инструкции для FRENIC-ECO

Бренды по названию

Популярные бренды