Fuji Electric FRENIC-ECO, Инструкция по эксплуатации

Страница: 212 / 246

8-1
Chapter 8 SPECIFICATIONS
8.1 Standard Models
8.1.1 Three-phase 208V
001 002 003 005 007 010 015 020 025 030 040 050 060 075 100 125
1 2 3 5 7.5 10 15 20 25 30 40 50 60 75 100 125
1.6 2.7 3.8 6.0 9.0 11 16 21 27 31 41 51 60 76 98 123
4.6 7.5 10.6 16.7 25 31 47 60 75 88 114 143 169 211 273 343
3.1 5.8 8.7 14.5 20.6 27.5 41.3 55.1 68.8 82.6 109 134 160 199 270 333
5.1 9.1 12.9 21.5 30.8 40.8 59.4 76.6 94.0 110 144 179 215 - - -
1.2 2.2 3.2 5.3 7.5 10 15 20 25 30 40 49 58 72 98 120
7.1
(3.2)
7.3
(3.3)
7.3
(3.3)
7.5
(3.4)
13
(5.8)
13
(6.0)
15
(6.9)
21
(9.7)
21
(9.7)
25
(11.5)
51
(23)
73
(33)
75
(34)
90
(41)
90
(41)
265
(120)
*1 Standard 4-pole motor
*2 Rated capacity is calculated by assuming the output rated voltage as 208V for three-phase 208V.
*3 Output voltage cannot exceed the power supply voltage.
*4 An excessively low setting of the carrier frequency may result in the higher motor temperature or tripping of the inverter by its overcurrent
limiter setting. Lower the continuous load or maximum load instead. (When setting the carrier frequency (F26) to 1kHz, reduce the load to
80% of its rating.)
*5 Use [R1,T1] terminals for driving AC cooling fans of an inverter powered by the DC link bus, such as by a high power factor PWM
converter. (In ordinary operation, the terminals are not used.)
*6 Calculated under Fuji-specified conditions.
*7 Obtained when a DC reactor (DCR) is used.
*8 Average braking torque (Varies with the efficiency of the motor.)
Max. voltage(V) - Min. voltage(V)
Three-phase average voltage(V)
If this value is 2 to 3%, use an AC reactor (ACR).
UL508C, C22.2 No.14, EN50178-1997
Voltage unbalance(%)= *9
Mass
〔
lbs(kg)
〕
IP00, UL open type
Fan cooling
IP20, UL open type
DC reactor (DCR)
Br
ak
in
g
Cooling method
Applicable safety standards
DC injection braking
Enclosure (IEC60529)
Standard Option
Type (FRN _ _ _ F1S-2U)
Overload capability
Rated frequency 50, 60Hz
O
ut
put
r
at
ing
s
Nominal applied motor
〔
HP
〕
Rated capacity
〔
kVA
〕
Rated voltage
〔
V
〕
Rated current 〔 A 〕
Three-phase, 200 to 240V, 50/60Hz
Single-phase, 200 to 240V, 50/60Hz
Main power supply
Auxiliary control
power input
In
p
ut ra
tin
g
s
Rated current
〔
A
〕
Voltage/frequency variations
(with DCR)
(without DCR)
Auxiliary fan
power input
Phases,
voltage,
frequency
Single-phase, 200 to 230V, 50/60Hz
Torque 〔 % 〕
Required power supply capacity 〔 kVA 〕
10 to 15 20.0
None
Item Specifications
× 67(IEC61800-3(5.2.3))
Starting frequency: 0.0 to 60.0Hz, Braking time:0.0 to 30.0s, Braking level: 0 to 60%
Voltage: +10 to -15% (Voltage unbalance 2% or less) *9, Frequency: +5% to -5%
120% of rated current for 1min.
Three-phase, 200V to 240V (With AVR function) Three-phase, 200V to 230V (With AVR function)
Three-phase, 200 to 220V, 50Hz
Three-phase, 200 to 230V, 60Hz
Single-phase, 200 to 220V, 50Hz
Single-phase, 200 to 230V, 60Hz
*1
*2
*3
*4
*5
*7
*8
cooling
Natural
C22.2 No.14
UL508C
*6