FTE Maximal MAX S405 HD PLUS, Быстрое руководство по установке

Страница: 36 / 49

PAG. 36
rev 1.2
EN
GL
ISH
then it may be that you don’t need to provide the power to
the LNB. But since this is depending on the kind of installed
distribution system we recommend you to contact your installer
or to refer to the user manual of this system to get the correct
information.
You also just can change this setting and check if you still can
receive the channels. If the LNB Power is off and you still can
see all channels then we recommend this setting.
3. Low Power Consumption: At this option, you could enable
/ disable the low power consumption mode. This mode allows
saving current consumption when the receiver is stand-by
(<1W). By default this option is enabled.
4. Press [Exit] button to leave this menu.
SYSTEM SETUP