FTE Maximal MAX S405 HD PLUS, Быстрое руководство по установке

Страница: 39 / 49

PAG.39
rev 1.2
EN
GL
ISH
TOOLS
6.4.2. BACKUP TO USB
This option allows saving information of the receiver in the
USB device. Options: Software or channels and the current
configuration (OSD 91).
Once you have selected the type of information that you want
to export to the USB device, select “start” and press [OK] in
order to save the data.
6.4.3. UPGRADE BY SATELLITE
This function can upgrade the software of your receiver through
data sent by a satellite. At the moment we offer satellite updates
only through ASTRA1 satellite.
1. Select the satellite and TP or input the TP value and
download PID.
2. Then mark “Start” and press [Enter] to begin the download
of the upgrade (OSD 92). This may need up to 60 Minutes.
Therefore we suggest using of this function only if you don’t
intent to watch TV during this time.
At the moment of writing this manual, the data for the software
upgrade by Satellite is:
•Satellite: Astra
•TP Frequency: 12604 MHz.
•Symbol Rate: 22000
•Polarity: Horizontal
•Download PID: 1294
“Auto OTA Config” option will allow activating the updating mode
by OTA automatically. Options: Auto, off or confirm (OSD 93).
-Auto: It will make the updating automatically.
-Off: It will not make the update.
-Confirm: It will request the user’s confirmation to start the
updating.
In order to configure the parameters concerning the automatic
updating, you have to access to the Programmer option.
For changes in the data of the satellite please visit http://www.
ftemaximal.com .
OSD 91
OSD 92
OSD 93