INSTALLATION AND MAINTENANCE MANUAL
TRANSLATION OF THE
ORIGINAL DOCUMENT
For additional copies visit:
www.frost‐trol.com
LOMOND
SOLID LINES
D003670
Versión:
3
-12-
2.
INTALLATION OF REFRIGERATED DISPLAY CABINET
Handling operations and installation of the cabinet are reserved for skilled
person.
2.1.
CABINET LOCATION
Consult the Construction Manager or the person responsible for the installation of
unit. Ask them to inform you of its installation location or if there are any changes
to where it is to be installed.
Check that the installation location chosen is suitable. To do this, make sure that
there is no air flow present, as this could affect the units by blowing hot air into
them. The unit must not be installed near air conditioning air discharge openings,
ventilators, doors or other machines that, due to their location, could expel warm air
from their condensing units into the cabinet or onto its condensing unit.
The refrigerated display cabinet must not be installed in places where
explosive gases are present. Do not expose the equipment to
atmospheric agents.
If the chosen location is not suitable for the installation of the cabinet, inform the
Construction Manager or the person responsible for the supermarket accordingly, so
that they can either specify another location or make the necessary modifications
that would make the original location suitable (closure of air vents, removal of
ventilators, closure of doors, etc.).
During the installation (or while carrying out maintenance) you must always wear
proper safety equipment to preserve your security.
It’s mandatory to leave 10cm between the cabinet rear wall and the
supermarket wall to ensure the airflow.
Keep the condensing unit openings free from obstructions.
CRITICAL FACTOR
IT IS COMPLETELY FORBIDDEN TO PERFORATE THE CABINET.
IF THIS WERE OCCUR, IT COULD CREATE IRREPARABLE DAMAGES.
Содержание LOMOND PI0C008640FDPD17
Страница 4: ......
