frost-trol LOMOND PI0C008640FDPD17, Руководство по установке и обслуживанию

Страница: 31 / 38

INSTALLATION AND MAINTENANCE MANUAL
TRANSLATION OF THE
ORIGINAL DOCUMENT
For additional copies visit:
www.frost‐trol.com
LOMOND
SOLID LINES
D007918 Versión: 3 -30-
4- Proceed to cleaning the glass. To do this, always place the glass on flat
surfaces on which it rests its entire surface in order to avoid breakage.
5- Once the surface is cleaned, verify that all the rubber seals remain correctly
mounted and replace the glass in its initial position.
The glass must fit into the lateral guide profile and rest on the central post.
RUBBER SEALS
CENTRAL POST
SIDE BACKSTOPPER
REAR COVER FOLD
FIXED GLASS