INSTALLATION AND MAINTENANCE MANUAL
TRANSLATION OF THE
ORIGINAL DOCUMENT
For additional copies visit:
www.frost‐trol.com
LOMOND
SOLID LINES
D003670
Versión:
3
-10-
1.5.
FIXATION OF THE RECOMMENDED TEMPERATURE
IN EACH COMPARTIMENT
Each cabinet, depending on the model and its options, is technically defined by a
different temperature depending on the application and it’s designed for preserving
a certain type of product.
TEMPERATURE
CLASS
TEMPERATURE OF
APPLICATION
MAXIMUM
TEMPERATURE
OF THE
HOTTEST
PRODUCT
MINIMUM
TEMPERATURE
OF THE
COLDEST
PRODUCT
[ºC]
[ºC]
[ºC]
M0 0/1 +4
-1
M1 0/+2 +5 -1
M2 +2/+4 +7 -1
H2 +4/+8
+10 -1
Table 2. Temperature depending on class for refrigeration cabinets.
TEMPERATURE
CLASS
TEMPERATURE OF
APPLICATION
MAXIMUM
TEMPERATURE
OF THE
HOTTEST
PRODUCT
MINIMUM
TEMPERATURE
OF THE
COLDEST
PRODUCT
[ºC]
[ºC]
[ºC]
L1 -15/-18
-15 -18
L2 -12/-18
-12 -18
L3 -12/-15
-12 -15
Table 3. Temperature depending on class for freezing cabinets.
1.6.
OPERATING THE COOLING SYSTEM
The condensing unit requires an air temperature of at least 20ºC and a maximum of
30ºC for efficient ventilation of the condenser. The minimum temperature of the
condenser should never fall below 20ºC.
1.7.
RECEIPT OF REFRIGERATED CABINET
Check the unit carefully to make sure that it is not damaged and no part or accessory
is missing. For information about missing parts or accessories please contact the
Frost-Trol Commercial Department or our official representative for your country.
This refrigerated display cabinet has been thoroughly inspected to ensure the highest
level of quality. Any order for components should be made to Frost-Trol or our official
representative for your country within 48 hours of receipt of the cabinet.
1.8.
DAMAGE SUSTAINED IN TRANSIT
Содержание LOMOND PI0C008640FDPD17
Страница 4: ......
