Fronius Robacta TSS /i, Руководство по эксплуатации, Страница: 8 / 100

If this area has to be accessed for preparatory or maintenance work, ensure that
-
the entire system is shut down for the duration of access to this area
- and remains shut down to prevent unintended operation, e.g., as a result of a control
error
In addition to these Operating Instructions, the safety rules of the robot manufacturer
must be followed.
Covers and side parts must only be opened/removed during maintenance and repair
work.
During operation:
-
Ensure that all covers are closed and all side parts have been mounted properly.
- Keep all covers and side parts closed.
Personal Protec-
tion and Protec-
tion of Others Magnetic fields generated by high amperage may eject ferromagnetic parts, such as
spatter accumulations, from the cleaning aperture. To prevent injury, always wear pro-
tective goggles with side protection and never look into the cleaning aperture when the
device is switched on.
Keep persons, especially children, away during the operation of the devices and during
the welding process. If persons are in the vicinity, however:
-
Instruct them about all dangers (blinding hazard due to arcs, injury hazard due to fly-
ing sparks, welding fumes hazardous to health, noise exposure, possible hazard due
to grid current or welding current, possible hazard due to electromagnetic fields,
possible hazard due to the magnetic field of the cleaning aperture, moving mechan-
ical parts, compressed air/parting agent mixture discharged from the cleaning aper-
ture, flying chips or similar, etc.),
- Provide suitable protective equipment or
- Construct suitable protective walls and curtains.
EMC Device Clas-
sifications Devices in emission class A:
-
Are only designed for use in industrial settings
- Can cause line-bound and radiated interference in other areas
Devices in emission class B:
-
Satisfy the emissions criteria for residential and industrial areas. This is also true for
residential areas in which the energy is supplied from the public low-voltage grid.
EMC device classification as per the rating plate or technical data.
Safety Measures
at the Setup Loc-
ation and During
Transport A toppling device can be deadly! Set up the device securely on an even, solid surface
-
A tilt angle of no more than 10° is permitted.
Special regulations apply in areas at risk of fire or explosion
-
Follow the appropriate national and international regulations.
Use instructions and checks within the company to ensure that the vicinity of the work-
place is always clean and organized.
Only set up and operate the device in accordance with the degree of protection shown
on the rating plate.
Install the device with an all-round clearance of at least 0.5 m (19.69 in.) to walls, neigh-
boring devices, or other objects.
8