manualshive.com logo in svg

Fronius Robacta TSS /i, Руководство по эксплуатации, Страница: 36 / 100

Поделиться
Скачать
Fronius Robacta TSS /i Скачать руководство пользователя страница 36

WARNING!

Danger due
to flying parts (chips, metal particles, etc.),
escaping compressed air/parting agent mixture,
electrically supplied, activated options.

If compressed air is supplied to the welding torch service station, serious injury can res-
ult.
If work needs to be carried out on the device while the welding torch service station is
being supplied with compressed air or the optional equipment is being supplied with
electricity:

▶

if there are TC cleaning units, keep all ferromagnetic parts (e.g., tools) away from
the device

▶

keep hands, hair, the face, items of property, and all items of clothing away from the
optional devices

▶

wear hearing protection

▶

wear protective goggles with side protection

WARNING!

Danger due to insufficient ground conductor connection!

Serious injury or damage to property can result.
The housing screws are a suitable ground conductor connection for grounding the hous-
ing.

▶

The housing screws must not under any circumstances be replaced by other screws
without a reliable ground conductor connection.

36

Содержание Robacta TSS /i





































































































Отзывы:

Нет отзывов