manualshive.com logo in svg

Fronius Robacta TSS /i, Руководство по эксплуатации, Страница: 15 / 100

Поделиться
Скачать
Fronius Robacta TSS /i Скачать руководство пользователя страница 15

Do not use the functions described here until you have fully read and understood the fol-
lowing documents:
-

these Operating Instructions

-

all Operating Instructions for system components, especially the safety rules

For indoor use only

Wear eye protection

Warning before the device switches on automatically

Types of Parting
Agent and Their
Use

NOTE!

The parting agents are not included in the scope of supply.

Types of parting agent and their use:
-

“Robacta Reamer” parting agent for spraying the welding torch after the cleaning
process

It is recommended that the welding torch be sprayed with the “Robacta Reamer” parting
agent for all applications.

Options

OPT/i Robacta TSS BK Profinet

4,101,127,CK

OPT/i Robacta TSS BK Profibus

4,101,179,CK

OPT/i Robacta TSS BK DeviceNet

4,101,180,CK

OPT/i Robacta TSS BK EtherCAT

4,101,181,CK

OPT/i Robacta TSS BK Ethernet IP

4,101,236,CK

OPT/i TSS TCP Touch Sense

4,001,003,CK

OPT/i TSS/i TCP tip

4,001,072,CK

OPT/i TSS level sensor

4,001,014,CK

15

EN-US

Содержание Robacta TSS /i





































































































Отзывы:

Нет отзывов