Fronius Robacta TSS /i, Руководство по эксплуатации, Страница: 7 / 100

Intended Use The device is to be used exclusively for its intended purpose.
The device is intended exclusively for the cleaning of Fronius welding torches.
Utilization for any other purpose, or in any other manner, shall be deemed to be “not in
accordance with the intended purpose.” The manufacturer accepts no liability for any
damage resulting from improper use.
Proper use also means
-
Reading and adhering to all instructions in the Operating Instructions
- Reading and adhering to all safety instructions and danger notices
- Carrying out all the specified inspection and servicing work
The device is designed for operation in industry and business. The manufacturer shall
not be liable for any damage resulting from use in a living area.
The manufacturer shall also not be liable for faulty or incorrect work results.
Environmental
Conditions Operation or storage of the device outside the stipulated area will be deemed as not in
accordance with the intended purpose. The manufacturer is not responsible for any dam-
age resulting from improper use.
Temperature range of the ambient air:
-
During operation: 0°C to + 40°C (32°F to 104°F)
- During transport and storage: -25°C to +55°C (-13°F to 131°F)
Relative humidity:
-
Up to 50% at 40°C (104°F)
- Up to 90% at 20°C (68°F)
Ambient air: free of dust, acids, corrosive gases or substances, etc.
Altitude above sea level: up to 2000 m (6500 ft.)
Obligations of the
Operating Com-
pany The operating company must only allow persons to work with the device if they
-
Are familiar with the basic occupational safety and accident prevention regulations
and are trained in handling the device
- Have read and understood these Operating Instructions, especially the section
"Safety Rules," and have confirmed this with their signature
- Are trained according to the requirements for the work results
The safety-conscious work of the personnel must be checked regularly.
Obligations of
Personnel All persons who are assigned to work with the device must do the following before begin-
ning the work:
-
Follow the basic regulations for occupational safety and accident prevention
- Read these Operating Instructions, especially the section "Safety Rules," and con-
firm that they have understood and will follow them by signing
Before leaving the workplace, ensure that no personal injury or property damage can
occur in one's absence.
Particular hazard
areas
Do not linger in the operating area of the robot.
Always integrate the device into a higher-level safety system in a secured area.
7
EN-US