Fronius LaserHybrid MHP 360i LH, Руководство по эксплуатации

Страница: 63 / 112

63
EN-US
Setting up Laser Welding Head
Stick Out There are two different mounting plates for the laser welding head, depending on the ap-
plication:
(1) Welding torch
(2) Contact tip
(3) Stick out
Mounting plate 17.5 mm:
Stick out = 14 mm
Mounting plate 21 mm:
Stick out = 20 mm
Mounting plate 21 mm Mounting plate 17.5 mm
- The TCP cannot be on the laser fo-
cus.
- For high outputs
- Guarantees a greater distance be-
tween the laser focus and the wire
electrode tip with the same adjust-
ment travel
- The TCP can be on the laser focus,
depending on the application.
(1)
(2) (3)
NOTE! When adjusting the physi-
cal location of the welding torch,
ensure there is a correct stick out
for any mounting plate present.