Fronius LaserHybrid MHP 360i LH, Руководство по эксплуатации

Страница: 15 / 112

15
EN-US
Before transporting the device, always completely drain the coolant and dismantle the fol-
lowing components:
-
Wirefeeder
- Wirespool
- Shielding gas cylinder
It is essential to conduct a visual inspection of the device to check for damage after it has
been transported but before it is commissioned. Have any damage repaired by trained ser-
vice technicians before commissioning the device.
Safety Measures
in Normal Opera-
tion Only operate the LaserHybrid head if all protective and safety devices are fully functional.
If the safety devices are not fully functional, there is a risk of
-
injury or death to the operator or a third party,
- damage to the device and other material assets belonging to the operating company,
- inefficient operation of the device.
Safety devices that are not fully functional must be repaired before the device is switched
on.
Never bypass or disable safety devices.
Before conditioning the LaserHybrid head, ensure that no one can be put in danger.
The LaserHybrid head must be examined at least once a week for externally detectable
damage and functionality of the safety devices.
Safety Inspection The operator is required to have the LaserHybrid head tested by an electrician after every
alteration, installation or modification, and all repairs and maintenance, and at least every
12 months, to ensure that it is in its correct state.
Modifications Do not carry out any alterations, installations, or modifications to the LaserHybrid head
without first obtaining the manufacturer’s permission.
Parts that are not in perfect condition must be replaced immediately.
Spare and Wear-
ing Parts Use only original spare and wearing parts (also applies to standard parts).
It is impossible to guarantee that externally procured parts are designed and manufactured
to meet the demands made on them, or that they satisfy safety requirements.
When ordering, specify the exact name and part number according to the Spare Parts List
as well as the serial number of your device.
Regulation Title
IEC (EN) 60 974-1 Equipment for Arc Welding, Part 1: Welding Current Sources
BGV A2, Section 5 Electrical Plants and Equipment
BGV D1, Sections 33 /
49 Welding, Cutting and Related Work Methods
VDE 0701-1 Repairing, Modifying and Testing Electrical Devices;
General Requirements
VDE 0702-1 Repeating Tests on Electrical Devices