Fronius 8,045,368, Руководство по эксплуатации

Страница: 41 / 60

39
7. Turn the "Welding ON/OFF" toggle switch to the "ON" position.
8. Turn the "Start LEFT / STOP / Start RIGHT" toggle switch to the desired setting and
start the welding process. To stop the process early, turn the switch to the "STOP" (0)
position.
IMPORTANT! Path welding stops automatically after the programmed welding path
is reached. Welding is also stopped as soon as a limit switch on the driving vehicle is
actuated.
Path welding
(continued)
5. Press the "+ / -" buttons and set the desired back-fill time (e.g. "1.0 s").
Press the "SELECT / ENTER" button to accept the value. The next parameter is
selected.
6. Press the "+ / -" buttons and set the desired total path (e.g. "900 cm").
Press the "SELECT / ENTER" button to accept the value. All signal lamps are unlit
and the current traversing speed of the driving vehicle is displayed (e.g. "60.0 cm/
min").