Fronius 8,045,368, Руководство по эксплуатации

Страница: 19 / 60

17
Possible
welding
positions
(continued)
Inside of container with minimum diameter of 2500 mm
NOTE! When used inside a container, the container must be turned in the op-
posite direction and at the same speed.
IMPORTANT! Use of the driving vehicle in the "PE" overhead position is prohibited.
Guidance of the
carriage
Guidance on outside vertical surface Guidance on inside vertical surface
The guide wheels automatically track the torch in the filled joint. They can be positioned
on either side of the driving vehicle. For detailed information about the correct setting of
the guide wheels, see the section "Preparing the driving vehicle". The guide wheels can
be set to the following positions: