Frigomat TAYLOR IC135 Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 8 / 71

7 - ENGLISH
3. INSTALLATION
3.1 FIELD OF USE
The multi-purpose machines of the C 135 series are specifically designed and built for the
cooking, cooling and batching cycles of ice cream mixtures and pastry products.
3.2 LIMITS OF USE
Never use the machine with variable supply voltage and/or more than +/- 10% of the value
showed in the nameplate or when the power cable is damaged;
Do not use the machine for purposes different from the ones indicated in the present
manual;
Do not use the machine in explosive environment;
Do not wash the machine with high-pressure jets of water or poisonous substances;
Do not expose the machine to excessive heat or humidity;
Do not use completely unbalanced mixtures and/or quantities not in compliance with the
specifications reported on the packing.
3.3 MACHINE OUTFIT
- Cleaning rod
- Stiff paddle
- Mixer scraping blades
- Centering
device plugs
- Spring Kit
- Kit O-ring
- Mixer stuffing box
- Gasket dismantling tool
- Transparent hopper cover
- Lubricator
- Manual of use and maintenance
- Conformity
declaration
- Warranty
3.4 COMMISSIONING
Bring the machine to the place of employment and check that everything is all right as far
as installation concerns:
Power supply;
Water supply;
Suitable run-off pit for water
.
•
Lock the machine by means of the apposite lever located on the front wheels;
•
Place the machine far from walls or other obstacles (at least 10 cm sideways and 30 on
the back). In case the machine is provided with water-cooled condenser, the distance
between the wall and the back panel can be reduced to 10 cm.
•
Make sure that the supply voltage and power comply with the values reported on the
rating plate placed on the back panel;
•
Connect the machine to the mains; upstream the machine, arrange an omnipolar main
switch with minimum contact opening equal to 3 mm and adequate power, interlocked
with fuses to allow plugging and unplugging at open circuit.
•
Connect the power cable to a type-approved plug: the power cable shall be well
stretched, to avoid rolling and overlapping. It shall not be exposed to possible shocks or
tampering; attempts and far from liquids, water and heat sources. It shall not be
damaged, otherwise make it be replaced by qualified personnel with another section