Frigomat TAYLOR IC135 Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 22 / 71

21 - ENGLISH
5.5 EXTRACTION OF HOT MIXTURES
5.5.1 POURING OUT INTO THE BATCHING CYLINDER
Please follow this procedure to pour the product from
the boiling tank directly into the batching cylinder
below:
- Make sure the quantity of the product to pour
from the boiling tank into the batching cylinder
complies with the maximum and minimum
quantities indicated (see chap. 5.6).
- Make sure the batching cylinder is fitted with the
mixer and that the door is correctly assembled in
all its parts and closed tightly.
- Verify that the cock body is in vertical position so
the product can fall directly into the hopper of the
batching door.
- If not, extract the locking pin from its seat, bring
the cock body in vertical position and reposition
the pin.
- Verify that the hopper cover is in place.
- Whatever function the machine is running, press
“ MIXING ” on the boiler pushbutton panel.
- To start pouring out the mixture, rotate the piston
knob until it is unlocked and pull it slowly towards
yourself.
With very liquid products, it is important to pull the
piston slowly and very carefully so the door
hopper is not filled to the top.
If the product should flow out of the hopper the
operator could get burned!
- Use the batch freezer pushbutton panel to select
the desired work program and start the batching
cycle.
- When the entire product is poured out and the
boiling tank is empty, push the piston to its
closing position and rotate it to its locking
position.
- Press the “ STOP ” key on the boiler pushbutton
panel.