Frigomat TAYLOR IC135 Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 5 / 71

ENGLISH - 4
1 TRANSPORT, HANDLING AND STORAGE.
1.1 PRELIMINARY INSPECTION
The machine travels at the customer’s risk. In case packing is damaged, immediately
inform the carrier.
Immediately inform the carrier also in case of damage to the machine, even if you open
the packing a few days after the delivery.
It is always advisable to accept the goods SUBJECT TO INSPECTION.
The equipment should be handled with great care: falls and shocks can damage it without
showing external damages.
1.2 MACHINE UNPACKING
For a correct machine unpacking, carefully follow the instructions hereunder reported:
in case of carton packing on wooden frame:
•
Remove the strap fixing the carton to the bottom and take the packing off from the top.
In case of wood case:
•
Remove the case upper side and the side walls by means of a nail drawer, pay
attention not to disperse the nails and the wood splinters;
•
Remove the plastic bag and put it in a safe place;
•
Unscrew the machine side panels by means of a cross and/or cut screw-driver;
•
Turn out the screws fixing the packing lower side by means of a 17mm wrench;
•
Remove the packing lower part, lift the machine and hook it up to the lifting points
specified on the frame with the symbols;
•
Reposition the side panels
The packing shall be stored in a dry place, out of children’s reach. It can be used again, if
correctly preserved, for a possible transfer of the machine.
The storing temperature shall range between -25 and +55 °C.
Humidity shall range between 30 and 95%.
Packing elements such as plastic bags, nails, expanded polystyrene, cartons, etc. must be
left out of children’s reach.
1.3 Packing dimensions
CASE
MODEL
SIZES (CM) WEIGHT (KG)
C 135
96 x 52 x h. 162 240-290