Fri-Jado Deli Multisserie, Руководство по обслуживанию

Страница: 72 / 132

Page 72
18
17
16
15
19
20
14
23
22
21
24
A
B
13 12
Condenser Hood
Service Manual Deli Multisserie form 9123667 rev. 20220317
ACCESS TO SERVICE PARTS
Service access to the previous mentioned
parts.
Remove 12 screws and take away the top
plate of the condensor.
Slide out the Condenser Untill the 90° knee
can be reached and disconnect this. Now
slide out the condenser completely. It might
be necessary to put some extra force on the
point marked with “12”.
The condensor
pipe has to slide out of the corresponding
bush and the O-ring might stick.
In case the “cold flush” blower needs ser-
vice, than also remove the back side top
plate. see picture 6.
The following parts can be recognized:
14. Cold flush blower.
15. Connecting pipe to previous mentioned
non-return valve (oven inlet).
16. Connecting pipe on exhaust oven.
17. Connecting hose, silicon.
18. Sliding bush.
19. Vapour inlet condenser.
20. Condenswater drain tube.
21. Electric wire for the 3 heat exchanger
blowers.
22. Junction connector in wire 21.
23. Top covers for oven. 4pcs total.
24. Construction beam (2x) for top covers.
Removing the top covers.
After unscrewing, the top covers can be re-
moved. The beams can simply be taken out.
The two front covers have to be unscrewed
from the frontside, underneath the conden-
ser.
Now there is a clear view on most parts. See
picture 7 and 8.
Picture 7 taken from the left side
Front side ---->
Picture 5
Picture 6
90° knee