manualshive.com logo in svg

Fri-Jado Deli Multisserie, Руководство по обслуживанию, Страница: 18 / 132

Поделиться
Скачать
Fri-Jado Deli Multisserie Скачать руководство пользователя страница 18

PROGRAMMING INSTRUCTIONS

Page 18

Service  Manual Deli Multisserie   form 9123667  rev. 20220317

HIDDEN POSSIBILITIES

Demo mode.

The controller has a so called “Demo Mode”. See parameter “demo mode” in the chapter 

“parameter listings”.

In this demonstration mode, the heating of the unit is disabled and will si-
mulate the machine heating up, only through software. All other functions 
are still active.

Continues rinse.
It is also possible to have a continues rinse. 
To achieve this, the unit has to be set to “demo mode” first. 
After that and switching the unit OFF and ON, the “ON/OFF” and “Pro-
grams” key have to be pushed together for 3 seconds.

SWITCH OFF THE MULTISSERIE

Press and hold both keys On/Off and settings 
until the display light goes out and the rotis-
serie is OFF.

Since software version 5.02.07, switching OFF 
can be done with only the On/Off key.

Содержание Deli Multisserie





































































































































Отзывы:

Нет отзывов