Freemotion 510 Rear Drive Скачать руководство пользователя

Страница: 6 / 36

• To hire an authorized service technician to

assemble the elliptical, call 1-800-445-2480.

• To watch an assembly video, go to

www.freemotionfitness.com/assembly or use

your mobile phone or

smartphone to read the

QR code at the right. A

reader application, such

as ShopSavvy, which can

be downloaded at www.

shopsavvy.mobi, must be

installed on your mobile

phone or smartphone.

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you complete all assembly steps.

• To identify small parts, see page 5.

In addition to the included tool(s), assembly

requires the following tools:

one Phillips screwdriver

one rubber mallet

Assembly may be easier if you have your own set

of wrenches. To avoid damaging parts, do not use

power tools.

ASSEMBLY

1. Orient the Rear Stabilizer (4) as shown.

Attach the Rear Stabilizer (4) to the Folding

Frame (2) with two M10 x 95mm Screws (100).

Next, hold the handle on the Rear Stabilizer (4),

press the Latch Button (67), and lower the Rear

Stabilizer and the Folding Frame (2) to the floor.

100

Handle

Содержание 510 Rear Drive





































Результаты поиска

Содержание 510 Rear Drive

Отзывы:

Похожие инструкции для 510 Rear Drive

Бренды по названию

Популярные бренды

Freemotion 510 Rear Drive, Руководство пользователя

Результаты поиска

Содержание 510 Rear Drive

Отзывы:

Похожие инструкции для 510 Rear Drive

Бренды по названию

Популярные бренды