Freemotion 510 Rear Drive Скачать руководство пользователя

Страница: 27 / 36

Inspect and tighten all parts of the elliptical regularly.

Replace any worn parts immediately.

To clean the elliptical, use a damp cloth and a small

amount of mild soap. IMPORTANT: To avoid damage

to the console, keep liquids away from the console

and keep the console out of direct sunlight.

CONSOLE TROUBLESHOOTING

If the console does not display your heart rate when

you hold the handgrip heart rate monitor, or if the dis-

played heart rate appears to be too high or too low, see

step 5 on page 21.

HOW TO CALIBRATE THE RAMP

If the ramp is not functioning properly, the ramp may

need to be calibrated. To calibrate the ramp, press and

hold the Calorie button for several seconds until the

test mode appears in the display.

Press the Calorie button again. Then, press the Power

Ramp increase or decrease button to calibrate the

ramp. The ramp will move upward and downward as it

calibrates.

When the ramp stops moving, the ramp is calibrated.

Then, press the Calorie button repeatedly to exit the

calibration mode.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the

reed switch should be adjusted.

To adjust the reed

switch, first unplug

the power cord.

Using a flat screw-

driver, release the

tabs on the Access

Cover (20) and pry

the Access Cover

upward off the

elliptical.

Next, look into the access opening and locate the Reed

Switch (69). Rotate the Large Pulley (74) until a Pulley

Magnet (75) is aligned with the Reed Switch.

Next, loosen, but do not remove, the indicated M4 x

16mm Screw (106). Slide the Reed Switch (69) slightly

toward or away from the Pulley Magnet (75). Then,

retighten the Screw.

Plug in the power cord and rotate the large pulley for

a moment. Repeat these actions until the console

displays correct feedback. When the reed switch is cor-

rectly adjusted, reattach the access cover.

MAINTENANCE AND TROUBLESHOOTING

106

Содержание 510 Rear Drive





































Результаты поиска

Содержание 510 Rear Drive

Отзывы:

Похожие инструкции для 510 Rear Drive

Бренды по названию

Популярные бренды

Freemotion 510 Rear Drive, Руководство пользователя

Результаты поиска

Содержание 510 Rear Drive

Отзывы:

Похожие инструкции для 510 Rear Drive

Бренды по названию

Популярные бренды