13
13. Note: If you purchase the optional chest
heart rate monitor (see page 24), see
step 17 on page 14 to install the receiver
included with the heart rate monitor.
Orient the Rear Upright Cover (25) as shown.
Attach the Rear Upright Cover (25) to the Upright
(5) with four M4 x 19mm Screws (125).
13
14. Untie and discard the wire tie attached to the
Main Wire (60).
While a second person holds the Console (33)
near the Upright (5), connect the wires on the
Console to the Main Wire (60), to the Receiver
Extension Wire (155), and to the Pulse
Wires (105).
Insert the excess wire downward into the Upright
(5) or upward into the Console (33).
Tip: Avoid pinching the wires. Attach the
Console (33) to the Upright (5) with four M4 x
19mm Screws (125).
5
33
105 155
125
14
125
25
5
60
Avoid pinching
the wires
