Freefly Alta 8 Pro, Руководство пользователя

Страница: 35 / 128

If ALTA Pro is purchased as a bundle with a transmitter or FPV kit, these will be factory
installed and ALTA Pro will be ready to fly out of the box! For customers installing their own
receivers or FPV systems, please follow the instructions below. The guide details the first
time setup process for ALTA Pro 8.
Radio Installation
Radio Controller Receiver
ALTA Pro requires the installation of a radio control system. S.Bus, S.Bus2, DSM2, and DSMX
receiver types are supported. Some ALTA Pro emergency control modes (Return-to-Land
and Autoland) may vary depending on the type of radio. Refer to the Flight Controller Modes
section of this manual for additional details.
Additionally, ALTA Pro supports radio receiver diversity using S.Bus, S.Bus2, DSM2 and
DSMX receivers. This means two receivers may be installed, and the Autopilot flight
controller will automatically use the receiver with the best signal quality. Using two receivers
requires the radio controller to be bound to both receivers. Refer to the instructions provided
with your radio controller to complete the binding process. For Spektrum radios a receiver is
required to bind the satellites to a radio controller.
Futaba Radio for ALTA Pro 8
1. Locate the noted closeout panels used for receiver installation (between booms 2 & 3
and 6 & 7).