Freefly Alta 8 Pro, Руководство пользователя, Страница: 58 / 128

Function Descriptions
The following functions can be mapped to radio controller channels. These are found in the
Radio section of the Configurations menu in ALTA QGroundControl. Each function is also
represented by a chart that responds to control input allowing for quick verification of
mapping settings.
Controller
Use this to select the appropriate receiver. The following guide is compiled for convenience.
For complete specifications and which mode will work with your receiver, refer to your radio
controller or receiver manuals. DSM2/DSMX are typically used by Spektrum controllers
SBUS is typically used by Futaba controllers
Pitch/Roll/Yaw/Throttle
The Pitch, Roll, Yaw and Throttle controls are the basic flight controls and are mapped to the
two radio controller sticks.
Mode
The required Mode Switch selects between the three different flight modes: Manual,
Altitude, and Position. A three-position switch is recommended to select the three different
modes. However, a two-position switch may be used, but will only allow for selecting
between Manual Mode and (depending on radio controller mixes) either Altitude Mode or
Height Mode
Return to Home Switch
The optional Return to Home Switch selects between the different Return-to-Land (RTH)
functions. At minimum a two-position switch is required for the Home Switch functions to
select between RTL Off, and initiate RTL functions.