Always use a thread locking compound on the bolt threads that attach the
propeller hub to the motor.
Odd numbered booms (1, 3, 5 and 7) use clockwise rotating propellers when looking from the
top down, and even numbered booms (2, 4, 6 and 8) use counterclockwise rotating propellers.
Always check to ensure the correct propeller rotation direction and correct
propeller prior to flight. Propellers that spin in the incorrect direction will
cause ALTA Pro to be uncontrollable.
Replacing Propeller Bumpers
Under normal use, propeller bumpers (see exploded view figure on the next page) may split
and fall out of the folding propeller assembly. Six spare bumpers are provided with the ALTA
Pro. To replace the bumper, disassembly of the folding propeller is required.
Start by removing the M3 x 19 bolt and nylon nut. Pull off the upper prop adapter. The two
bumpers are held in place by cylindrical features in the lower prop adapter. Replace the worn
or split bumper.
Содержание Alta 8 Pro
