Foxpro FURY 2, Инструкция по эксплуатации

Страница: 28 / 36

28 | P a g e
Text
There are two options for text; NORMAL and LARGE NUMBERS ONLY.
The vast majority of users will leave this setting on NORMAL, but for those
who have trouble reading the information on the screen, you are invited to
use the LARGE setting. To change the text settings, use the selector to
highlight the desired option then press down on the selector knob one time.
Graphics
The graphics menu allows you to control whether the screen NORMAL or
REVERSE IMAGE. Reversing the image may be beneficial for users who
are hunting at night to help reduce the glow from the screen. You can also
set the contrast. To change the graphics settings, use the selector to
highlight the desired option then press down on the selector knob one time.
To set the contrast, highlight the SET CONTRAST option and press down
on the selector knob. You will see a cursor appear in the middle of the
screen. The middle position is the default position. To make adjustments,
rotate the selector knob clockwise or counterclockwise to set the bar.
Moving the cursor to the left will decrease the contrast and to the right will
increase. Once you have a desired setting picked, press down on the
selector knob one time to lock it in.
Scroll
This menu allows you to adjust how the scrolling function will work. PAGED
will result in six sounds being displayed per page and six more sounds
being displayed upon incrementing to the next page. SINGLE will allow you
to increment up by one sound at a time rather than a page at a time.
NOTE: By default, the scroll option will be set to SINGLE.
Backlight
There are four options in the backlight menu; ALWYS OFF, LOW, MEDIUM,
HIGH, and ALWAYS ON. To change the backlight settings, use the selector
to highlight the desired option then press down on the selector knob one
time.
NOTE: You should experiment with the different settings to find out
which ones work the best in varying conditions.
CHANNEL
You can select the desired channel that you want to TX-505 to operate on
from this menu. Make sure that the channel selected in the TX-505
corresponds to the same channel setup in the FURY 2. See the channel
selection section for more information. To change the channel, use the
selector to highlight the desired option then press down on the selector knob