Foxpro FURY 2, Инструкция по эксплуатации

Страница: 24 / 36

24 | P a g e
5) Exit the menu
Changing the Channel of Operation on the FURY 2
1) Remove the battery compartment door from the back side of your
FURY 2 and then remove the batteries.
2) Locate the DIP switch to the right of the USB port.
3) You can use the tip of pen or pencil to modify the values of the DIP
switch to change the channel of operation. There are four individual
switches that are dual position. The two positions are referred to as ON
and OFF.
Refer to the following image and switch positioning matrix when you
are making channel modifications:
The above image is looking directly down onto the switch from the battery
compartment. The two possible switch positions for each of the four switches
are noted on the top as ON and OFF. The ON position is selected by moving
the switch to the left (towards the USB port). The OFF position is selected by
moving the switch to the right.
Each of the four switches are marked 1 – 4. When referring to matrix below, be
sure that you modify the switches starting with 1 then continuing on through
number 4.
CH 1 2 3 4 CH 1 2 3 4
0 OFF OFF OFF OFF 8 OFF OFF OFF ON
1 ON OFF OFF OFF 9 ON OFF OFF ON
2 OFF ON OFF OFF 10 OFF ON OFF ON