Foxpro FURY 2, Инструкция по эксплуатации

Страница: 16 / 36

16 | P a g e
Numerical Entry Method:
You can also directly access any sound by direct numerical entry on the
keypad. For example, if you want to play sound 005, simply press the numbers
0, 0, and 5 sequentially on the keypad.
6.5 SETTING THE VOLUME
When the TX-505 is first turned on, the volume setting is preset to 00, as the
display will indicate. Once you have selected and transmitted your sound to
the FURY 2, simply depress the volume up button on the transmitter to your
desired level.
Depressing the volume buttons will cause the volume number to change in the
display from a low of “0” to a high of “40”. These changes are transmitted to
the FURY 2 in real time, causing the volume to ramp up or down.
The TX-505 allows you to change the volume step size to a specific level. By
default, the ramp speed will be set to 2. This means that every time you press
the volume up or down button, the volume level will increment or decrement by
2. You can change this value to 2, 4, 5, 8, or 10. To set this value:
NOTE: If you have volume steps 2 or 4 selected, you will notice that when
stepping the volume up or down using a continuous key-press, the
volume steps will gradually increase to 5.
1) Press and hold the rotary selector knob to access the main menu.
2) Highlight the “TX505 CONFIG” menu and depress the rotary selector
knob one time.
3) Use the selector knob highlight “VOLUME STEPS” and then depress
the selector knob one time.
4) Use the selector knob to highlight the desired volume stepping value
and then depress the selector knob to lock it in.
5) Exit the menus.
The volume numbers are important, as you will begin to identify your preferred
volume settings, and with the FURY 2 placed away from you, it gives you the
ability to know exactly at what volume the FURY 2 is playing. Without this, you
may have a difficult time determining just how loud or soft your unit is playing.
6.6 MUTE
To mute the current sound that is playing, simply depress the mute button on
the TX-505 transmitter. Mute mode is indicated by an “M” appearing in the
bottom status line. To un-mute, simply depress the mute button again.