Foxpro FURY 2, Инструкция по эксплуатации

Страница: 21 / 36

21 | P a g e
3) Once you have positioned the bar in your desired position, press down
the selector knob one time to lock the change in place.
FOXFADE in Stereo Mode
When you are operating the FURY 2 in stereo playback mode and playing a
stereo audio file, the left audio channel will play through the front horn speaker
and the right audio channel will play through the rear cone speaker. Let’s say
that the sound you are playing is a coyote and rabbit stereo file; coyote on the
left channel and rabbit on the right channel. When you enter FOXFADE and
move the vertical bar towards the left and lock the selection in, the sound of the
rabbit on the right channel will be reduced. If you move the bar to the right and
lock the selection in, the sound of the coyote will be reduced.
FOXFADE can help create many new scenarios in the field and help add
realism to your stand.
Using a Mono File in Stereo Mode
If you are playing a mono file while operating the unit in stereo mode, the FURY
2 will play the same sound out of both speakers. FOXFADE will act in the same
manner as playing a stereo file with fading out the volume of one of the
channels depending upon which way you move the bar.
6.10 AUTO-V
AUTO-V (auto-volume) provides you with a sort of “cruise control” for volume
adjustment and attenuation. When engaged, AUTO-V will start at the lowest
possible volume (0) and slowly climbs to 75% or volume level 30 which is the
default maximum volume level for AUTO-V, across a three minute period. Once
volume level 30 is reached, AUTO-V begins to reduce and increase the volume
level by 30% increments every ten seconds. For example, volume level 30 will
be reduced by 30% in a ten second period, and then increased back up 30%
across another ten second period. It will continue operating in this manner until
it is shut off.
Note:
When using PRESETS while AUTO-V is enabled, the preset volume
control may not be recognized. For proper operation while using PRESETS,
turn AUTO-V off.
Turning AUTO-V On
It is not necessary that you have a sound playing prior to engaging AUTO-V as
it will begin its cycle after the sound begins playback.
1) Hold down the selector knob for 2-3 seconds to access the main menu.
2) Select FURY 2 CONTROL
3) Select AUTO-V ON to engage AUTO-V
4) Exit the menu