Foxpro FURY 2, Инструкция по эксплуатации

Страница: 20 / 36

20 | P a g e
2) Use volume up/down buttons to set the desired volume level
3) Select the desired sound by using the rotary selector knob to highlight
it on the screen.
4) To lock the selected volume and sound in, press the desired number
(0-9) for that preset on the keypad. When pressing the number button,
this exits you from set preset mode and you are now in the preset
mode.
5) To add another preset, follow steps 1-5.
Playing a Preset
1) Briefly press the PRESET button one time to enter preset mode.
2) Press the desired number of the preset you wish to play. Make sure
that you have preset in place prior to attempting to play it. The chosen
preset should play immediately.
6.9 FOXFADE
FOXFADE allows you to fade the volume level of the sound being played
between the front and rear speaker and allows you shut them off. There are
three ways in which FOXFADE can be used; mono, stereo, and reversed
stereo. FOXFADE will provide the best effect when using a stereo audio file
that contains two separate animal recordings; however, it can be used with
mono sounds that are being played in stereo mode.
Using FOXFADE
1) With the sound playing, press the FOXFADE button on the side of the
TX-505 transmitter
2) Use the selector knob to move the cursor left or right on the screen.
Moving the knob
clockwise
will result in the bar moving towards the
left of the screen which corresponds with the front (horn) speaker and
the left audio channel. By moving the bar in this direction, the volume
level of the back speaker will go down. Moving the cursor to the far left
and depressing the rotary selector knob will result in the front speaker
being turned off.
Moving the knob
counterclockwise will result in the bar moving
towards the right of the screen which corresponds with the back (cone)
speaker and right audio channel. By moving the bar in this direction,
the volume level of the front speaker will go down. Moving the cursor to
the far right and depressing the rotary selector knob will result in the
rear speaker being turned off.