Foxpro FURY 2, Инструкция по эксплуатации

Страница: 7 / 36

7 | P a g e
sound you wish to play. When you begin entering a number on the keypad, the
numbers you type will appear in large text on the screen. You need to enter the
three digit number of the sound you wish to play. For example, type in a
number in the range of 000 through 499 to play the corresponding sound.
Note: Make sure that you do not enter a number that is larger than the total
number of sounds programmed in the FURY 2. For example, if you have 100
sounds and type in 234, nothing will happen.
1.5 POWERING DOWN
Be sure to power down both the FURY 2 and TX-505 after use to help prolong
the battery life.
Powering Down the TX-505
Push and hold the selector knob until the selection menu appears (with TURN
OFF TX-505 already highlighted). By pressing the selection knob a second
time the transmitter will shut off. Should you forget to turn off the transmitter
when you are finished, it will automatically shut down after 2 hours of non-use.
Powering Down the FURY 2
Turn off the FURY 2 by rotating the On/Off switch to the off position.
2.0 ABOUT THE FOXPRO
®
FURY 2 SPEAKERS
The FURY 2 incorporates two different types of loudspeakers. The front
speaker is a high efficiency horn with maximum sensitivity in the frequency
range necessary to reproduce small animal distress sounds. Distress sounds of
rabbits, small rodents, birds, canines, and many others are best reproduced by
using the front horn only with the rear cone speaker turned off. This will also
ensure maximum battery life as playing both speakers requires almost twice as
much battery power.
The rear cone speaker is best suited to sounds that have significant lower
frequency content.
These sounds would include bear growls, mountain lion
roars, certain owl hoots, and some other large mammal sounds. The rear
speaker, however, is not as efficient as the front horn. Because of this, it will
not play as loud as the horn. Understand that not all calling sounds will benefit
greatly from playing both speakers at once. If you elect to do this, remember
that battery life will be reduced.
3.0 BATTERIES AND CHARGING
Your FURY 2 operates on 8 “AA” batteries. For optimal performance and run
times, we recommend using high capacity (2000 mAh or higher) NiMH (Nickel
Metal Hydride) rechargeable cells rather than alkaline types. When you operate
your FURY 2 to play at extremely loud volume levels, the current demand on
the batteries is much more than alkaline cells can deliver. Consequently, the