FoxGate S63 series, Руководство по настройке

Страница: 58 / 565

Basic Switch Configuration
57
（
3
）
Modify TFTP server connection retransmission time
Command Explanation
Global Mode
tftp-server
retransmission-number
< number >
Set the retransmission time for TFTP server.
2.5.3.3 FTP/TFTP Configuration Examples
The configuration is same for IPv4 address or IPv6 address. The example only for
IPv4 address.
Fig 2-3 Download nos.img file as FTP/TFTP client
Scenario 1: The switch is used as FTP/TFTP client. The switch connects from one of its
ports to a computer, which is a FTP/TFTP server with an IP address of 10.1.1.1; the switch
acts as a FTP/TFTP client, the IP address of the switch management VLAN is 10.1.1.2.
Down
load ―nos.img‖ file in the computer to the switch.

FTP Configuration
Computer side configuration:
Start the FTP server software on the computer and set the username ―Switch‖, and the
password ―superuser‖. Place the ―12_30_nos.img‖ file to the appropriate FTP server
directory on the computer.
The configuration procedures of the switch are listed below:
Switch(config)#interface vlan 1
Switch(Config-if-Vlan1)#ip address 10.1.1.2 255.255.255.0
Switch(Config-if-Vlan1)#no shut
Switch(Config-if-Vlan1)#exit
10.1.1.2
10.1.1.1