FoxGate S63 series, Руководство по настройке

Страница: 382 / 565

IPv6 Multicast Protocol
381
no ipv6 mld snooping vlan < vlan-id >
suppression-query-time
default
Ipv6 mld snooping vlan <vlan-id>
static-group <X:X::X:X> [source
<X:X::X:X> ] interface [ethernet |
port-channel] <IFNAME>
no ipv6 mld snooping vlan <vlan-id>
static-group <X:X::X:X> [source
<X:X::X:X> ] interface [ethernet |
port-channel] <IFNAME>
Configure static-group on specified port of
the VLAN. The no form of the command
cancels this configuration.
44.2.3
MLD Snooping Examples
Scenario 1: MLD Snooping Function
Fig 44-1 Open the switch MLD Snooping Function figure
As shown above, the vlan 100 configured on the switch consists of ports 1, 2, 6, 10
and 12. Four hosts are respectively connected to 2, 6, 10 and 12 while the multicast router
on port 1. Suppose we need MLD Snooping on VLAN 100, however by default, the global
MLD Snooping as well as the MLD Snooping on each VLAN are, therefore first we have to
enable the global MLD Snooping at the same time enable the MLD Snooping on VLAN
100, furthermore we need to set the port 1 of VLAN 100 as a mrouter port.
Configuration procedure is as follows.
Switch#config
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld snooping vlan 100
Switch(config)#ipv6 mld snooping vlan 100 mrouter-port interface ethernet 1/0/1
Multicast configuration:
Multicast Router
Mrouter Port
MLD Snooping
Switch
Group1 Group1 Group1 Group2