FoxGate S63 series, Руководство по настройке, Страница: 37 / 565

Basic Switch Configuration
36
Global Mode
banner motd <LINE>
no banner motd
Configure the information displayed when the
login authentication of a telnet or console user
is successful.
2.2
Telnet Management
2.2.1
Telnet
2.2.1.1 Introduction to Telnet
Telnet is a simple remote terminal protocol for remote login. Using Telnet, the user
can login to a remote host with its IP address of hostname from his own workstation.
Telnet can send the user‘s keystrokes to the remote host and send the remote host output
to the user‘s screen through TCP connection. This is a transparent service, as to the user,
the keyboard and monitor seems to be connected to the remote host directly.
Telnet employs the Client-Server mode, the local system is the Telnet client and the
remote host is the Telnet server. Switch can be either the Telnet Server or the Telnet client.
When switch is used as the Telnet server, the user can use the Telnet client program
included in Windows or the other operation systems to login to switch, as described earlier
in the In-band management section. As a Telnet server, switch allows up to 5 telnet client
TCP connections.
And as Telnet client, using telnet command under Admin Mode allows the user to
login to the other remote hosts. Switch can only establish TCP connection to one remote
host. If a connection to another remote host is desired, the current TCP connection must
be dropped.
2.2.1.2
Telnet Configuration Task List
1. Configure Telnet Server
2. Telnet to a remote host from the switch.
1. Configure Telnet Server
Command Explanation
Global Mode
telnet-server enable
no telnet-server enable
Enable the Telnet server function in the
switch: the no command disables the
Telnet function.