FoxGate S63 series, Руководство по настройке

Страница: 204 / 565

QoS Configuration
203
If there are no parameters, clear
accounting data of all policy map.
7. Show configuration of QoS
Command Explanation
Admin Mode
show mls qos maps [cos-intp | dscp-intp
| intp-intp | intp-cos | intp-dscp | intp-dp |
intp-queue]
Display the configuration of QoS
mapping.
show class-map [ <class-map-name> ] Display the classified map information of
QoS.
show policy-map [ <policy-map-name> ] Display the policy map information of
QoS.
show mls qos aggregate-policy
[ <aggregate-policy-name> ]
Display the aggregate policy
configuration of QoS.
show mls qos interface [ <interface-id> ]
[policy | queuing]
Display QoS configuration information
on a port.
show mls qos vlan <v-id> Display QoS configuration on VLAN
interface.
20.3 QoS Example
Example 1:
Enable QoS function, change the global queue out weight to 1:1:2:2:4:4:8:8, set
port ethernet 1/0/1 in trust CoS mode without changing DSCP value, and set the default
CoS value of the port to 5.
The configuration steps are listed below:
Switch#config
Switch(config)# mls qos queue weight 1 1 2 2 4 4 8 8
Switch(config)#interface ethernet 1/0/1
Switch(Config-If-Ethernet 1/0/1)#mls qos trust cos
Switch(Config-If-Ethernet 1/0/1)#pass-through-dscp
Switch(Config-If-Ethernet1/0/1)#mls qos cos 5
Configuration result:
When QoS enabled in Global Mode, the egress queue bandwidth proportion of each
port is 1:1:2:2:4:4:8:8. When packets have CoS value coming in through port