FoxGate S63 series, Руководство по настройке

Страница: 29 / 565

Switch Management
28
1.1.2.3
Manage the Switch via SNMP Network Management
Software
The necessities required by SNMP network management software to manage switches:
1) IP addresses are configured on the switch;
2) The IP address of the client host and that of the VLAN interface on the switch it
subordinates to should be in the same segment;
3) If 2) is not met, the client should be able to reach an IP address of the switch
through devices like routers;
4) SNMP should be enabled.
The host with SNMP network management software should be able to ping the IP
address of the switch, so that, when running, SNMP network management software will
be able to find it and implement read/write operation on it. Details about how to manage
switches via SNMP network management software will not be covered in this manual,
please r
efer to ―Snmp network management software user manual‖.
1.2
CLI Interface
The switch provides thress management interface for users: CLI (Command Line
Interface) interface, Web interface, Snmp netword management software. We will
introduce the CLI interface and Web configuration interface in details, Web interface is
familiar with CLI interface function and will not be covered,
please refer to ―Snmp network
management software user manual‖.
CLI interface is familiar to most users. As aforementioned, out-of-band management
and Telnet login are all performed through CLI interface to manage the switch.
CLI Interface is supported by Shell program, which consists of a set of configuration
commands. Those commands are categorized according to their functions in switch
configuration and management. Each category represents a different configuration mode.
The Shell for the switch is described below:

Configuration Modes

Configuration Syntax

Shortcut keys

Help function

Input verification

Fuzzy match support