FoxGate S63 series, Руководство по настройке

Страница: 561 / 565

Monitor and Debug
560
2. Configure the log host output channel
Command Description
Global Mode
logging {< ipv4-addr > | < ipv6-addr >} [ facility
< local-number> ] [level <severity> ]
no logging { <ipv4-addr > | < ipv6-addr >}
[ facility < local-number >]
Enable the output channel of the
log host. The ―no‖ form of this
command will disable the output
at the output channel of the log
host.
logging loghost sequence-number
no logging loghost sequence-number
Add the loghost
sequence-number for the log, the
no command does not include
the loghost sequence-number.
3. Enable/disable the log executed-commands
4. Display the log source
5. Display executed-commands state
71.7.3
System Log Configuration Example
Example 1: When managing VLAN the IPv4 address of the switch is 100.100.100.1, and
the IPv4 address of the remote log server is 100.100.100.5. It is required to send the log
Command Description
Global mode
logging executed-commands {enable |
disable}
Enable or disable the logging
executed-commands
Command Description
Admin and configuration mode
show logging source mstp
Show the log information source
of MSTP module.
Command Description
Admin mode
show logging executed-commands state
Show the state of logging
executed-commands