FoxGate S63 series, Руководство по настройке

Страница: 32 / 565

Switch Management
31
DHCP Address Pool Mode
Type the ip dhcp pool <name> command under Global Mode will enter the DHCP
Address Pool Mode prompt ―Switch(Config-<name>-dhcp)#‖. DHCP address pool
properties can be configured under DHCP Address Pool Mode. Run the exit command to
exit the DHCP Address Pool Mode to Global Mode.
Route Mode
Routing Protocol Entry Operates Exit
RIP Routing
Protocol
Type router rip
command under
Global Mode.
Configure RIP
protocol parameters.
Use the exit
command to return
to Global Mode.
OSPF Routing
Protocol
Type router ospf
command under
Global Mode.
Configure OSPF
protocol parameters.
Use the exit
command to return
to Global Mode.
BGP Routing
Protocol
Type router bgp
<AS mumber>
command under
Global Mode.
Configure BGP
protocol parameters.
Use the exit
command to return
to Global Mode.
ACL Mode
ACL type Entry Operates Exit
Standard IP
ACL Mode
Type ip access-list
standard command
under Global Mode.
Configure parameters
for Standard IP ACL
Mode.
Use the exit
command to return
to Global Mode.
Extended IP
ACL Mode
Type ip access-list
extanded command
under Global Mode.
Configure parameters
for Extended IP ACL
Mode.
Use the exit
command to return
to Global Mode.
1.2.2 Configuration Syntax
Switch provides various configuration commands. Although all the commands are
different, they all abide by the syntax for Switch configuration commands. The general
commands format of Switch is shown below:
cmdtxt <variable> {enum1
| … | enumN } [option1 | … | optionN]
Conventions: cmdtxt in bold font indicates a command keyword; <variable> indicates a
variable parameter;
{enum1 | … | enumN }
indicates a mandatory parameter that should
be selected from the parameter set enum1~enumN ; and the square bracket ([ ]) in
[option1 | … | optionN]
indicate an optional parameter. There may be combinations of