FoxGate S6124 Скачать руководство пользователя страница 98

Страница: 98 / 391

Parameters:

<interface-name>

is the interface name.

Command Mode:

Admin and Configuration Mode.

Default:

None.

Usage Guide:

If no parameters are appended, the global ULDP information will be

displayed. If the interface name is specified, information about the interface and its

neighbors will be displayed along with the global information.

Example:

To display the global ULDP information.

Switch(config)# show uldp

6.9 debug uldp fsm interface ethernet

Command: debug uldp fsm interface ethernet

<IFname

no debug uldp fsm interface ethernet <

IFname

Function:

To enable debugging information for ULDP for the specified interface. The no

form of this command will disable the debugging information.

Parameters:

<IFname

is the interface name.

Command Mode:

Admin Configuration Mode.

Default:

Disabled by default.

Usage Guide:

This command can be used to display the information about state

transitions of the specified interfaces.

Example:

Print the information about state transitions of interface ethernet 1/1.

Switch#debug uldp fsm interface ethernet 1/1

6.10 debug uldp error

Command: debug uldp error

no debug uldp error

Function:

Enable the error message debug function, the no form command disable the

function.

Parameter:

None.

Command Mode:

Admin Mode.

Default

: Disabled.

Usage Guide:

Use this command to display the error message.

Example:

Display the error message.

Switch#debug uldp error

Содержание S6124








































































































































































































































































































































































































Результаты поиска

Содержание S6124

Отзывы:

Бренды по названию

Популярные бренды

FoxGate S6124, Руководство по управлению

Результаты поиска

Содержание S6124

Отзывы:

Бренды по названию

Популярные бренды