FoxGate S6124 Скачать руководство пользователя страница 333

Страница: 333 / 391

333

Parameters:

<seconds>

is the timer value (second) for RADIUS server timeout, the valid

range is 1 to 1000.

Command mode:

Global Mode

Default:

The default value is 3 seconds.

Usage Guide:

This command specifies the interval for the switch to wait RADIUS server

response. The switch waits for corresponding response packets after sending RADIUS

Server request packets. If RADIUS server response is not received in the specified

waiting time, the switch resends the request packet or sets the server as invalid according

to the current conditions.

Example:

Setting the RADIUS authentication timeout timer value to 30 seconds.

Switch(config)# radius-server timeout 30

33.17 radius-server accounting-interim-update timeout

Command: radius-server accounting-interim-update timeout <

seconds

no radius-server accounting-interim-update timeout

Function:

Set the interval of sending fee-counting update messages; the no operation of

this command will reset to the default configuration.

Parameters:

<seconds>

is the interval of sending fee-counting update messages, in

seconds, ranging from 60 to 3600.

Command Mode:

Global Mode.

Default:

The default interval of sending fee-counting update messages is 300 seconds.

User Guide:

This command set the interval at which NAS sends fee-counting update

messages. In order to realize the real time fee-counting of users, from the moment the

user becomes online, NAS will send a fee-counting update message of this user to the

RADIUS server at the configured interval.

The interval of sending fee-counting update messages is relative to the maximum

number of users supported by NAS. The smaller the interval, the less the maximum

number of the users supported by NAS; the bigger the interval, the more the maximum

number of the users supported by NAS. The following is the recommended ratio of interval

of sending fee-counting update messages to the maximum number of the users supported

by NAS:

Table 7-1 The recommended ratio of the interval of sending fee-counting update

messages to the maximum number of the users supported by NAS

The maximum number of users

The interval of sending fee-counting update

messages(in seconds)

Содержание S6124








































































































































































































































































































































































































Результаты поиска

Содержание S6124

Отзывы:

Бренды по названию

Популярные бренды

FoxGate S6124, Руководство по управлению

Результаты поиска

Содержание S6124

Отзывы:

Бренды по названию

Популярные бренды