385
Default:
Do not provide power supply for non-standard IEEE PD.
Usage Guide:
With this function enabled, the switch will be compatible with and provide
power supply for non-standard IEEE PD. Do not provide power supply for non-standard
IEEE PD in switch.
Examples:
Set the switch to provide power supply for non-standard IEEE PD.
Switch(Config)#power inline legacy enable
44.1.4 power inline max (Global)
Command: power inline max
<max-wattage>
no power inline max
Function:
Set the global max output power of PoE.
Parameters:
max-wattage: value of the max output power, in W. Any integer from 37 to
130 is valid.
Command:
Global Mode.
Default:
The global max output power is 130W.
Usage Guide:
Setting a global max output power can guarantee a secure power supply
and an effective method to control the power consumed by connected subordinate
devices.
Example:
Set the global max output power to 50W.
Switch(Config)#power inline max 50
44.1.5 power inline max (Port)
Command: power inline max
<max-wattage>
no power inline max
Function:
Set the max output power of a specified port.
Parameters:
max-wattage: the value of the max output power, in mW, ranging from 1 to
15400mW, with a granularity of 100mW. Any value less than 100mW will be taken as
100mW, that is, 1~100 equals 100
，
15301~15400 equals 15400. But the value set by
users will be maintained without being rounded up.
Command Mode:
Port Mode.
Default:
The max output power of a port is 15400mW.
Usage Guide:
This configuration will effectively control the output power of each port in
cooperation with the global max power.
Example:
Set the max output power of Port 1 to 0.8W.
Switch(Config)#interface ethernet 1/1
Switch(Config-Ethernet1/1)#power inline max 800
Содержание S6124
Страница 311: ...311 Machine...
Страница 314: ...314...
Страница 318: ...318 am interface am ip pool 50 10 10 1 30 am mac ip pool 00 02 04 06 08 09 20 10 10 5 am ip pool 50 20 10 1 20...
