FoxGate S6124, Руководство по управлению

Страница: 202 / 391

202
Switch(dhcp-1-config)#host 10.1.128.160 24
Related Command: host
20.1.6 debug ip dhcp server
Command: debug ip dhcp server { events | linkage | packets }
no debug ip dhcp server { events | linkage | packets }
Function:
Enables DHCP server debug information: the ―
no debug ip dhcp server
{ events | linkage |
packets }”
command disables the debug information for DHCP
server .
Default: Debug information is disabled by default.
Command mode: Admin Mode.
20.1.7 default-router
Command: default-router < address1 > [< address2 >
[…<
address8 >]]
no default-router
Function: Configures default gateway(s) for DHCP
clients; the ―
no default-router
‖
command deletes the default gateway.
Parameters: <
address1>…<address8>
are IP addresses, in decimal format.
Default: No default gateway is configured for DHCP clients by default.
Command Mode: DHCP Address Pool Mode
Usage Guide: The IP address of default gateway(s) should be in the same subnet as the
DHCP client IP, the switch supports up to 8 gateway addresses. The gateway address
assigned first has the highest priority, and therefore address1 has the highest priority, and
address2 has the second, and so on.
Example: Configuring the default gateway for DHCP clients to be 10.1.128.2 and
10.1.128.100.
Switch(dhcp-1-config)#default-router 10.1.128.2 10.1.128.100
20.1.8 dns-server
Command: dns-server < address1 > [< address2 >
[…<
address8 >]]
no dns-server
Function:
Configure DNS servers for DHCP clients; the ―
no dns-server
‖ command
deletes the default gateway.
Parameters: <
address1>…<address8>
are IP addresses, in decimal format.
Default: No DNS server is configured for DHCP clients by default.