FoxGate S6124, Руководство по управлению

Страница: 384 / 391

384
what the power state of a specified port is.
Example: Globally disable PoE.
Switch(Config)#no power inline enable
44.1.2 power inline enable (Port)
Command: power inline enable
no power inline enable
Function: Enable/disable PoE power supply.
Parameters: None.
Command Mode: Port Mode.
Default: The power supply state on ports is enabled.
Usage Guide:
Enabled: Automatically detect PD. In such a state, PSE will automatically detect and
classify a PD, and provide power supply for it according to the classification. If a PD
connection is detected, its specified output power will be satisfied as long as there is
enough available power, after which the corresponding LED indicator will be updated.
Otherwise, the power distribution rules will decide whether or not to implement this power
supply. During a normal power supply process, if PD requires for an extra power which
exceeds the max threshold value, the supply will be cut off and the corresponding LED
indicator will be updated. When the PD is disconnected from the PSE normally, PSE will
stop outputting power supply and update the corresponding LED indicator.
Disabled: Disable power supply. With the PSE power supply disabled, no power will be
output regardless of the existence of PD connections, which means the port will act as a
regular Ethernet data port without affecting data transmission.
When it is globally disabled, no power supply will be output regardless of the power supply
is enabled or disabled on ports.
Examples: Disable power supply on ports1, 3, 4, 5, 6.
Switch(Config)# interface ethernet 1/1;3-6
Switch(Config-Port-Range)#no power inline enable
44.1.3 power inline legacy
Command: power inline legacy enable
no power inline legacy enable
Function: Set whether or not to provide power supply for non-standard IEEE PD.
Parameters: None.
Command Mode: Global Mode.