FoxGate S6124, Руководство по управлению

Страница: 208 / 391

208
Command Mode: DHCP Address Pool Mode
Usage Guide: This command is used to specify WINS server for the client, up to 8 WINS
server addresses can be configured. The WINS server address assigned first has the
highest priority. Therefore, address 1 has the highest priority, and address 2 the second,
and so on.
Example: Setting the server address
of DHCP pool ―1‖ to 192.168.1.1.
Switch(dhcp-1-config)#netbios-name-server 192.168.1.1
20.1.20 netbios-node-type
Command: netbios-node-type {b-node | h-node | m-node | p-node | <type-number> }
no netbios-node-type
Function:
Sets the node type for the specified port; the ―
no netbios-node-type
‖
command cancels the setting.
Parameters: b-node stands for broadcasting node, h-node for hybrid node that
broadcasts after point-to-point communication; m-node for hybrid node to communicate in
point-to-point after broadcast; p-node for point-to-point node; <type-number> is the node
type in Hex from 0 to FF.
Default: No client node type is specified by default.
Command Mode: DHCP Address Pool Mode
Usage Guide: If client node type is to be specified, it is recommended to set the client
node type to h-node that broadcasts after point-to-point communication.
Example: Setting the node type for client of pool 1 to broadcasting node.
Switch(dhcp-1-config)#netbios-node-type b-node
20.1.21 network-address
Command: network-address < network-number > [< mask > | < prefix-length >]
no network-address
Function:
Sets the scope for assignment for addresses in the pool; the ―
no
network-address
‖ command cancels the setting.
Parameters: <network-number> is the network number; <mask> is the subnet mask in
the decimal format; <prefix-length> stands for mask in prefix form. For example, mask
255.255.255.0 in prefix is ―24‖, and mask 255.255.255.252 in prefix is ―30‖. Note: When
using DHCP server, the pool mask should be longer or equal to that of layer 3 interface IP
address in the corresponding segment.
Default: If no mask is specified, default mask will be assigned according to the address
class.