FoxGate S6124 Скачать руководство пользователя страница 273

Страница: 273 / 391

273

Chapter 26 Commands for Multicast

VLAN

26.1 multicast-vlan

Command: multicast-vlan

no multicast-vlan

Function:

Enable multicast VLAN function on a VLAN; the ―no‖ form of this command

disables the multicast VLAN function.

Parameter:

None.

Command Mode:

VLAN Configuration Mode.

Default:

Multicast VLAN function not enabled by default.

Usage Guide:

The multicast VLAN function can not be enabled on Private VLAN. To

disabling the multicast VLAN function of the VLAN, configuration of VLANs associated

with the multicast VLAN should be deleted. Note that the default VLAN can not be

configured with this command and only one multicast VLAN is allowed on a switch.

Examples:

Switch(config)#vlan 2

Switch(Config-Vlan2)# multicast-vlan

26.2 multicast-vlan association

Command: multicast-vlan association

<vlan-list>

no multicast-vlan association

<vlan-list>

Function:

Associate several VLANs with a multicast VLAN; the ―no‖ form of this

command cancels the association relations.

Parameter:

<vlan-list>

the VLAN ID list associated with multicast VLAN. Each VLAN can

only be associated with one multicast VLAN and the association will only succeed when

every VLAN listed in the VLAN ID table exists.

Command Mode:

VLAN Mode.

Default:

The multicast VLAN is not associated with any VLAN by default.

Usage Guide:

After a VLAN is associated with the multicast VLAN, when there comes the

multicast order in the port of this VLAN, then the multicast data will be sent from the

multicast VLAN to this port, so to reduce the data traffic. The VLAN associated with the

Содержание S6124








































































































































































































































































































































































































Результаты поиска

Содержание S6124

Отзывы:

Бренды по названию

Популярные бренды

FoxGate S6124, Руководство по управлению

Результаты поиска

Содержание S6124

Отзывы:

Бренды по названию

Популярные бренды