FoxGate S6124, Руководство по управлению

Страница: 386 / 391

386
44.1.6 power inline police
Command: power inline police enable
no power inline police enable
Function: Enable/disable the power priority management policy mode.
Parameters: None.
Command Mode: Global Mode.
Default: The power priority management policy mode is enabled.
Usage Guide: Decide whether to use priority policy in power management policy. The
―enable‖ command will make priority policy in effect, while ―no‖ command will recover the
first-come-first-served policy. With priority policy enabled, port priority can be configured
individually.
In priority mode, when not enough PSE power is available, ports with low priority will
be closed to satisfy the power supply for ports with high priority, no matter how long the
access time of a PD is. If two ports have same priority, the one with smaller sequence
number is higher privileged.
In first-come-first-served mode, new PDs will not get power supply if available PSE
power is not enough.
Note: the first-come-first-served mode is not supported by switch.
Example : Enable the power priority policy mode.
Switch(Config)#power inline police enable
44.1.7 power inline priority
Command: power inline priority {critical | high | low}
Function: Set power supply priority of a port.
Parameters: critical: the highest-level priority. high: high-level priority. low: low-level
priority.
Command Mode: Port Mode.
Default: Port priority is low.
Usage Guide: This command will take effect in the mode of
‖power inline police enable‖.
Without enough available power for newly connected PD, ports with higher priority will get
power supply first.
Examples: Set the priority of Port 1 to high and that of Port 2 to critical.
Switch(Config)#interface ethernet 1/1
Switch(Config-Ethernet1/1)#power inline priority high
Switch(Config)#interface ethernet 1/2
Switch(Config-Ethernet1/2)#power inline priority critical